3D printer software setup

Step 1: Download Cura 14.12 here

Step 2: During installation, tick all the checkboxes as shown below

Step 3: Install the Arduino drivers when prompted

Step 4: Finish the installation and run Cura 14.12

Step 5: During first time configuration, select other when prompted as shown below

Step 6: Select Prusa Mendel i3 as the machine after clicking next from the previous window

Step 7: Finish set up and launch Cura 14.12

Step 8: Change the basic/advanced settings on the left as shown below

Step 9: Load your desired print and click the SD card button to export G-Code to your SD card.

Printer setup instructions here